Construction Jobs in Uganda

This is role will perform inspections for E&I Quality Control activities to determine conformity to client, project and code, standards and regulations requirements, identify non-conformities and take appropriate action to control / prevent any occurrence and perform quality audits as applicable to verify compliance with project specifications and procedures. He/She will interface with Construction, Field Engineering, Subcontractors, Certifying Authority and Client as required. The role will report functionally to the Site QA/QC Manager. 

Job Overview: 

• Perform inspections for Civil, Structural and Architectural Quality Control activities to determine conformity to client, project and code, standards and regulations requirements.
  
• Identify non-conformities and take appropriate action to control / prevent any occurrence.
  
• Perform Quality audits as applicable to verify compliance with project specifications and procedures
  
• Interface with Construction, Field Engineering, Subcontractors, Certifying Authority and Client as required. 
  

Essential Qualifications and Education: 

• College/university graduate and/or higher education with minimum 10+ years’ experience in Electrical Engineering/Construction and QA/QC function/inspections.
  
• CompEx or IECEx related qualifications that permit sign-off of equipment to be suitable for use in hazardous areas. 
  
• Familiar with site quality control surveillance schemes and E&I equipment installation methods.
  
• Experience in E&I QC activities in oil & gas fabrication with 5 years minimum as Senior QC Inspector
  
• Major fabrication/construction site experience. Demonstratable similar scope experience if not energy industry related. 
  
• Familiar with construction standards and code of practices (e.g. API 505/540, IEC, etc)
  
• Experience in coordination of third party authorities and associated regulatory requirements.
  
• Preferred audit experience to ISO9001:2015 and/or construction inspection qualifications.
  
• Computer skills - MS Office Suite.
  
• English – good level - reading, written, spoken. 
  

This is role will perform inspections for E&I Quality Control activities to determine conformity to client, project and code, standards and regulations requirements, identify non-conformities and take appropriate action to control / prevent any occurrence and perform quality audits as applicable to verify compliance with project specifications and procedures. He/She will interface with Construction, Field Engineering, Subcontractors, Certifying Authority and Client as required. The role will report functionally to the Site QA/QC Manager. 

Job Overview: 

• Perform inspections for Civil, Structural and Architectural Quality Control activities to determine conformity to client, project and code, standards and regulations requirements.
  
• Identify non-conformities and take appropriate action to control / prevent any occurrence.
  
• Perform Quality audits as applicable to verify compliance with project specifications and procedures
  
• Interface with Construction, Field Engineering, Subcontractors, Certifying Authority and Client as required. 
  

Essential Qualifications and Education: 

• College/university graduate and/or higher education with minimum 10+ years’ experience in Electrical Engineering/Construction and QA/QC function/inspections.
  
• CompEx or IECEx related qualifications that permit sign-off of equipment to be suitable for use in hazardous areas. 
  
• Familiar with site quality control surveillance schemes and E&I equipment installation methods.
  
• Experience in E&I QC activities in oil & gas fabrication with 5 years minimum as Senior QC Inspector
  
• Major fabrication/construction site experience. Demonstratable similar scope experience if not energy industry related. 
  
• Familiar with construction standards and code of practices (e.g. API 505/540, IEC, etc)
  
• Experience in coordination of third party authorities and associated regulatory requirements.
  
• Preferred audit experience to ISO9001:2015 and/or construction inspection qualifications.
  
• Computer skills - MS Office Suite.
  
• English – good level - reading, written, spoken. 
  

• Perform inspections for Civil, Structural and Architectural (CSA) QC quality requirements. Including but not limited to: verification of foundation preparation, concrete works, the correct preparation and installation of reinforcements, sampling and concrete analysis, monitoring environmental conditions, curing and compression strength tests. Further responsibilities include verification of required earth works, grading, trench excavation, pipe bedding, backfilling and compaction. In addition, verification of building structures, steelwork fit-up and installation, vertical and horizontal alignment as well as the completion of roads and pavements.
  
• Support in development, responsible for review and implementation of CSA Quality Plans & Inspection Test Plans (ITPs).
  
• Review of subcontractor CSA QC ITPs and procedures.
  
• Ensure all the requirements of CSA Specifications, Project Procedures and Drawings are followed.
  
• Perform, supervise, monitor and witness critical inspection & test activities at site in accordance with the ITPs.
  
• Exercise a proactive approach in the prevention of any potential issues by interfacing with QC, Construction, Field Engineering, Subcontractors and Client as required.
  
• Ensure completeness and endorsement of quality related records/documentation, maintenance and storage and that deliverables are progressively compiled, finalised and included into the final project handover records.
  
• Ensure Quality Records signed-off by Client (where required) prior to handing them over for certification.
  
• Raising, follow-up and verification of closeout of punch items.
  
• Provide regular reports on quality progress, issues, risks and opportunities to Site Quality Team
  
• Raise non-conformance reports and ensure resolution of any non-conforming practices or materials/products and actively execute corrective and preventative actions
  
• Interface with Certifying Authority and other third parties to ensure timely certification and hand over of completed work